Dashboard; Display Port Utilization And Port Connections - NETGEAR S3600 Series User Manual

S3600 Series 8- or 16-Port 10G/Multi-Gigabit Ethernet Smart Switch with 2 SFP+ Ports

Dashboard

The information that is displayed on the dashboard is mostly self-explanatory.

Display port utilization and port connections

The Dashboard displays port utilization and port connections.
To display port utilization and port connections:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network,
or connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser and enter the IP address of the switch in the address field of
your web browser.
If you do not know the IP address of the switch, see Access the switch on-network
and connected to the Internet on page 25 or Access the switch off-network and not
connected to the Internet on page 32.
The Device Admin Password page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see Register the switch on page 35.
3. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight Cloud Portal or Insight
app, enter the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the device UI on page 34.
4. Click the Login button.
The Dashboard page displays.
The following table describes information about port utilization.
Field
Disconnected
Connected
Available
For more information about ports, see Configure the port settings on page 216.
Configure Switch System
Settings
Description
The total number of ports that are not connected
The total number of connected ports
The total number of available ports, including ports that are not connected to a
device and excluding SFP and SFP+ fiber ports in which no SFP transceiver module
is inserted
51 User Manual