Table of Contents
Advertisement
ProSAFE 8-Port and 16-Port Gigabit Web Managed Click Switch
6.
Select System > LAG.
7.
Select the LAG ID.
8.
In the Admin Mode list, select Enable.
9.
Click the APPLY button.
Your settings are saved.
Use Browser-Based Access to Specify LAG Membership
To specify LAG membership:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Browser
on page 14.
The login window opens.
4.
Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
Access the Switch Using a Web
Network Settings
28
Advertisement
Table of Contents
