Chapter 3: Board Component Descriptions; Overview; Component Descriptions; Power Management - Xilinx VCU1287 User Manual

Characterization board
Hide thumbs Also See for VCU1287:
Table of Contents

Advertisement

Board Component Descriptions

Overview

This chapter provides a detailed functional description of the board's components and
features.
Table 2-1, page 10
detailed functional description in this chapter. Component locations are shown in
Figure 2-1, page

Component Descriptions

Virtex UltraScale XCVU095-FFVB2104E Device
The VCU1287 board is populated with the UltraScale XCVU095-FFVB2104E FPGA at U1
(callout 1,
Figure
Architecture and Product Overview (DS890)

Power Management

12V Input Power
The VCU1287 board receives 12V main power through J28 (callout 3,
12V AC adapter that is provided with the VCU1287 board characterization kit. J28 is a 6-pin
(2 x 3), right angle, mini-fit connector.
When supplying 12V through J28, use only the power supply provided for use with this
CAUTION!
board (Xilinx part number 3800033).
Do NOT use a 6-pin, PC ATX power supply connector with J28. The pinout of the 6-pin, PC
CAUTION!
ATX connector is not compatible. J28 and the board will be damaged if an attempt is made to power it
from a PC ATX power supply connector.
VCU1287 Characterization Board
UG1121 (v1.0) December 11, 2015
identifies the components and links to the corresponding
9.
2-1). For further information on UltraScale FPGAs, see UltraScale
www.xilinx.com
[Ref
1].
Chapter 3
Figure
2-1) using the
12
Send Feedback

Advertisement

Table of Contents
loading

Table of Contents