Programmable Clocks Menu - Xilinx VCU1287 User Manual

Programmable Clocks Menu

The clock menu is used to set the frequency of the Super Clock-2 module (see SuperClock-2
Module) clock sources.
VCU1287 System Controller v1.0
-----------------------------
- Clock Menu-
1. Set VCU1287 Si570 Frequency
2. Set VCU1287 Si5368 Frequency
3. Save VCU1287 Clock Frequency to EEPROM
4. Restore VCU1287 Clock Frequency from EEPROM
5. View VCU1287 Saved Clocks in EEPROM
6. Set VCU1287 Clock Restore Options
7. Read VCU1287 Si570 Frequency
8. Read VCU1287 Si5368 Frequency
0. Return to Main Menu
Clock Menu Options
This section includes a description of the clock menu options using arbitrary sample value
entries and system controller responses. The entry value commentary is shown in
parentheses.
Option 1: Set VCU1287 Si570 Frequency
Enter the Si570 frequency <10-810MHz>:
(enter a value between 10 and 810)
200
RFreq_Cal[0]=0x02, RFreq_Cal[1]=0xBB, RFreq_Cal[2]=0xFF, RFreq_Cal[3]=0x8F,
RFreq_Cal[4]=0xC9
Freq:200.0000000000 HS_DIV=7 N1=4 DCO=5600.0 RFREQ=0x030FFF8251
VCU1287 Characterization Board
UG1121 (v1.0) December 11, 2015
www.xilinx.com
Appendix D: System Controller
Send Feedback
82