Table of Contents
Advertisement
Option 2: Continuous Scan GPIO Readings
Press any Key to Return to GPIO Menu
When any of the address DIP SW13 poles 1-4 are changed, or a pushbutton pressed, the
value beneath the switch position changes accordingly (showing a 0 or a 1).
SYS ADDR (SW13) (ADDR3, ADDR2, ADDR1, ADDR0)
0 0 0 0
Pushbuttons (SW11, SW12, SW5, SW6, SW10)
0 0 0 0 0
----------------------
FMC1_PRSNT = NO
FMC2_PRSNT = NO
PMBUS_CABLE_B = NO
FPGA_IIC_BUSY = YES
PMBUS_ALERT = YES
Board EEPROM Data Menu
The VCU1287 includes a QSPI memory device (N25Q128A) that is used to store the system
controller firmware as well as additional test information
VCU1287 System Controller v1.0
- EEPROM Menu -
-----------------------------
1. Read Board EEPROM Data
0. Return to Main Menu
Option 1: Read Board EEPROM Data Options
Board Name: VCU1287
Board Revision: 1.0
Serial Number:
Test Revision:
Test Date:
Test Time:
Test Name
-------------------------------
VCU1287 Characterization Board
UG1121 (v1.0) December 11, 2015
-
Status
www.xilinx.com
Appendix D: System Controller
Send Feedback
94
Advertisement
Table of Contents
