Table of Contents
Advertisement
Board Features
The VCU1287 characterization board features are listed here. Detailed information for each
feature is provided in
•
UltraScale XCVU095-FFVB2104E FPGA
•
BullsEye cable access to all 32 GTH and 32 GTY transceivers on the UltraScale
XCVU095-FFVB2104E FPGA
•
Onboard power supplies for all necessary voltages
•
Power connectors for optional use of external power supplies
•
Digilent USB JTAG programming port
•
System controller (Zynq-7000 AP SoC XC7Z010-CLG225 FPGA)
•
Two MGT power modules supporting UltraScale FPGA GTY and GTH transceiver power
requirements
•
A fixed 300 MHz 2.5V LVDS oscillator wired to multi-region clock capable (MRCC)
inputs
•
Two pairs of differential MRCC inputs with SMA connectors
•
SuperClock-2 module supporting programmable clock outputs
•
Samtec BullsEye connector pads for the GTY and GTH transceivers and reference clocks
•
General purpose DIP switches, LEDs, pushbuttons, and test I/O
•
Three VITA 57.1 FPGA mezzanine card (FMC) high pin count (HPC) connectors
•
USB-to-UART bridge
•
I2C bus
•
PMBus connectivity to the boards digital power supplies
•
Active cooling for the FPGA
VCU1287 Characterization Board
UG1121 (v1.0) December 11, 2015
Chapter 3, Board Component
www.xilinx.com
Chapter 1: Introduction
Descriptions.
Send Feedback
7
Advertisement
Table of Contents
