Xilinx VCU1287 User Manual page 20

The MGT transceiver power rails can also be supplied externally. The external supply
connectors are described in
The MGT Power Module MUST be removed when providing external power to the MGT
CAUTION!
transceiver rails.
Information about the available MGT power modules included with the VCU1287 board
characterization kit is available from the vendor websites
Active Heat Sink Power Connector
Callout 25, Figure 2-1
An active heat sink
sink and is powered from the 3-pin friction lock header J99
X-Ref Target - Figure 3-5
VCU1287 Characterization Board
UG1121 (v1.0) December 11, 2015
Table 3-2.
(Figure 3-5) is provided for the FPGA. A 12V fan is affixed to the heat
Figure 3-5: Active FPGA Heat Sink
www.xilinx.com
Chapter 3: Board Component Descriptions
[Ref 5].
(Figure 3-6).
Send Feedback
20