Helplines - GE Dash 2500 Operator's Manual

Helplines

3-12
Using the Dash 2500 Patient Monitor: Helplines
The following table provides examples of conditions that cause messages to
flash in the SelectBox.
Cause of Message
in SelectBox
Freeze hardkey is
pushed
System problem is
detected
NIBP cannot
determine values
Helplines appear at the bottom of the screen and continually offer information
relevant to the current menu option or task. For example, if the pointer is next to
the turn parameter off option in the a parameter's setup menu, the helpline will
read Hint: push Trim Knob to suspend all monitoring/alarms for this
parameter.
Dash 2500 Patient Monitor
Screen with Active SelectBox
Acknowledgment of
Message
choose SelectBox
correct problem or
choose SelectBox
choose SelectBox
Resulting Action
View frozen waveforms
menu appears
message in SelectBox is
cleared and the alarm is
canceled
message in SelectBox is
cleared and the alarm is
canceled
2042480-001 C