Resp Menu; Turn Parameter Off; Lead To Analyze; View Waveform - GE Dash 2500 Operator's Manual

RESP Menu

turn parameter off

Lead to analyze

View waveform?

Waveform size

10-4
RESP: RESP Menu
This option lets you suspend all monitoring and alarms for RESP. When you
choose this option, no vital sign area is allocated to RESP, and the message
offline-RESP appears in the setup parameters option. To resume monitoring,
choose offline-RESP from the setup parameters option.
This option lets you choose whether the impedance RESP will be derived from
Lead l or Lead ll.
You can use this option to choose whether or not the impedance respiration
waveform appears on the screen.
This option lets you change the height of the respiratory waveform to one
fourth, one half, one, two, four, or eight times the standard height. The selections
are X/4, X/2, 1X, 2X, 4X, and 8X. The chosen waveform size appears next to the
RESP label in the waveform area when it is a setting other than 1X.
Dash 2500 Patient Monitor 2042480-001 C