Probe Cleaning And Disinfection; Calibration; Specifications; Alaris ® Patents - GE Dash 2500 Operator's Manual

Probe Cleaning and Disinfection

Calibration

Specifications

Scale
Predictive Mode
Range
Resolution
Monitor Mode
Range
Accuracy
Resolution
Probes
Determination Time
®
Alaris Patents
14-10
Alaris® Turbo Temp®: Probe Cleaning and Disinfection
Do not immerse predictive temperature probes. The probe can be cleaned with a
solution of 10% bleach in water. Use a cloth or sponge-just damp, not wet-and
avoid getting any liquid into the interior of the probe.
The temperature parameter does not require calibration.
Specifications
° Fahrenheit (F)
° Celsius (C)
96.0°F (35.6°C) to 106.0°F (41.1°C)
0.1°F (0.1°C)
80.0°F (26.7°C) to 108.0° F (42.2°C)
± 0.2°F (± 0.1°C) (when tested in a calibrated liquid bath; meets
ASTM E1112, Table 1, in range specified)
0.1°F (0.1°C)
CAUTION:
Use only Alaris
thermal characteristics of the probe covers can affect the
performance of the instrument. Inaccurate readings or retention
problems may occur unless Alaris
used.
Approx. 10 seconds, typical
U.S. D300,728, D300,909. Other pending patents.
Dash 2500 Patient Monitor
®
probes and probe covers. The size, shape, and
®
probes and probe covers are
2042480-001 C