Communication Adaptor Connector - GE Dash 2500 Operator's Manual

Communication Adaptor Connector

A-10
Connections: Data Connections
Why don't I see each stat NIBP value trended?
The CIC only trends one NIBP determination value per minute; therefore, when
the Dash 2500 monitor is in stat mode, multiple determinations will not be
recorded on the CIC in vital signs or graphic trends.
What CIC features are not supported remotely?
Real-Time View tab:
Relearn button is unselectable
ECG tab:
Size is always 1x
Pacer Detection always reflects the current setting of the monitor
ST is always off
Relearn button is unselectable
SpO /Resp tab:
2
SpO Rate is always on
2
SpO Size is always 1x
2
Respiration Size is unselectable
ARTIFACT Alarm is always off
Relearn button is unselectable
Pressures tab:
Clear Message button is unselectable
Alarm Control tab:
Alarm limits and priorities always reflect the current setting of the monitor
The connector provides isolated RS-232 communication for software upgrade
and service use. Refer to the Dash 2500 Patient Monitor Service Manual (PN
2042481-001) for more information.
Dash 2500 Patient Monitor 2042480-001 C