GE Dash 2500 Operator's Manual page 33

AC Input Voltage
AC Input Frequency
AC Input Power
Internal Battery
Power Supply
Battery
Power Cable
* The Monitor may not meet Performance Specifications (ANSI/AAMI SP10) if it is stored or used outside of the specified ranges of environmental
parameters.
Fuses
Internal
FS1
FS2
FS3
FS4
FS5
External
FS
FS
2042480-001 C
Product Overview: Specifications
Specifications
100-240 V
50/60 Hz
120 VA
8.4 V nickel-metal-hydride (NiMH)
The Dash 2500 Patient Monitor can be powered from the internal battery or AC
power.
An internal, rechargeable battery pack powers the Monitor for greater than 180
minutes at a specified load. The battery typically charges to full capacity within 4
hours when power off.
The power cable is detachable.
0.5 amp, 60V, auto-reset
1.85 amp, 60V, auto-reset
10 amp, 250V, fast acting, not resettable
0.5 amp, 60V, auto-reset
0.1 amp, 60V, auto-reset
1amp, 250V, not resettable
1amp, 250V, not resettable
Dash 2500 Patient Monitor 2-9