Displayed Data; Alarms - GE Dash 2500 Operator's Manual

Displayed Data

Alarms

A-4
Connections: Data Connections
The chart below gives some general information as to what data is available to
the CIC and how it is handled (trending, alarm broadcast, etc.).
Parameter:
Sub-parameter
ECG: Waveform
ECG: HR
RESP: Waveform
RESP: Rate
SpO2: Waveform
SpO2: Saturation
SpO2: Rate
NIBP: Systolic
NIBP: Diastolic
NIBP: MAP
NIBP: HR
TEMP
In all cases, the alarm settings listed in the table below are in addition to the
settings described in the former chapters. The alarm levels and limits can only
be set in the Dash 2500 patient monitor. Alarm levels viewed at the CIC are
displayed as in the following table:
Alarm display
CIC
Dash 2500
NOTE: Alarms must be silenced at the Dash 2500 patient monitor. Alarms
cannot be silenced at the central station. The delay time of alarm
condition from Dash 2500 monitor to CIC is less than 5 seconds.
Dash 2500 Patient Monitor
Displayed
Trended
on CIC
on CIC
Screen
Alarm priority name
Crisis Warning
Crisis Warning
Prints to
Alarm Network
Broadcast Printer from
Dash 2500
Advisory Message
Procedural Message
2042480-001 C