Table of Contents
Advertisement
cards and the Routing and Control Boards (RCBs) in the front and the fan trays in the rear. The topics in
this section describe how to install or remove the switch fabric boards in a router.
How to Handle and Store MX10004 Switch Fabric Board
IN THIS SECTION
How to Hold an SFB | 173
How to Store a Switch Fabric Board | 174
The MX10004 SFBs have fragile components. To prevent damage to the SFBs, be sure you follow safe
handling practices.
How to Hold an SFB
You install Juniper Networks Switch Fabric Boards (SFBs) vertically and hold them vertically until they
are clear of the router. Then, you rotate them 90 degrees and place them on an antistatic mat or in an
antistatic bag for storage. See
Figure 74: JNP10004-SF2 Switch Fabric Board
Figure 74 on page
173.
173
Advertisement
Table of Contents
