Mx10K-Lc9600 Line Card - Juniper MX10004 Hardware Manual

MX10K-LC9600 Line Card

The MX10K-LC9600 (Model number: JNP10K-LC9600) is a fixed-configuration 24-port line card that
provides a line-rate throughput of 9.6 Tbps. The line card has twenty-four QSFP ports, each capable of
supporting a maximum speed of 400 Gbps.
Figure 32: MX10K-LC9600
QSPF Ports
1
—
Ejector Handles
2
—
The MX10K-LC9600 line card combines Packet Forwarding Engines based on custom ASICs by Juniper
Networks. The line card has six fowarding ASICs, each hosting two Packet Forwarding Engines.The line
card has 12 Packet Forwarding Engines, each providing a maximum bandwidth of 800 Gbps.
You can channelize the ports using breakout cables to speeds of 400 Gbps, 200 Gbps, 100 Gbps, 50
Gbps, 40 Gbps, 25 Gbps, or 10 Gbps.
The 9.6-Tbps line card is designed to operate only with the following components:
• JNP10004-SF2 and JNP10008-SF2 switch fabric
• JNP10K-PWR-AC2 or JNP10K-PWR-DC2 power supplies
• The JNP10008-FAN2 fan tray
• The JNP10008-FTC2 fan tray controller
• JNP10004-FAN2 fan tray
• JNP10004-FTC2 fan tray
Lane LEDs
3
—
PWR, STS, and OFF LEDs
4
—
74