Juniper MX10004 Hardware Manual page 29

See Figure 11 on page 19
physical specifications of the chassis of these components.
Figure 11: Front View of the MX10004 Router
1 RCBs
—
2 Status panel
—
WARNING: The handles on each side of the chassis are not for lifting the chassis. These
handles facilitate the fine-tune positioning of the chassis on the base brackets. Do not
use the handles to lift the chassis, even when the chassis is empty. See
Juniper Networks MX10004 Router Using the JNP10004-RMK-4POST Rack-Mount
Kit" on page 120
to help identify the major components. See
for instructions about properly moving a loaded chassis.
Table 4 on page 20
3 Line cards
—
for the
"Mount the
19