Jnp10K-Pwr-Dc2 Power Specifications - Juniper MX10004 Hardware Manual

JNP10K-PWR-DC2 Power Specifications

Table 19 on page 52 lists the power specifications for the high-voltage direct current (HVDC) power
supply used in MX10004 routers.
Table 19: Power Specifications for the JNP10K-PWR-DC2 Power Supply
Item
DC input voltage
DC input current rating
Output power
Table 20 on page 53 shows the physical specifications for a JNP10K-PWR-DC2 power supply.
Specifications
•
Minimum operating voltage: –40 VDC
•
Nominal operating voltage: –48 VDC
•
Operating voltage range: –40 VDC through –72 VDC
•
76-A maximum at minimum operating voltage (-40 VDC) with
80-A DIP switch setting and 5500-W output load
•
64-A maximum at nominal operating voltage (–48 VDC) with
80-A DIP switch setting and 5500-W output load
•
60-A maximum at minimum operating voltage (-40 VDC) with
60-A DIP switch setting and 4400-W output load
•
50-A maximum at nominal operating voltage (-48 VDC) with
60-A DIP switch setting and 4400-W output load
•
2200 W for low-input (60-A) single feed
•
4400 W for low-input (60-A) dual feed
•
2750 W for high-input (80-A) single feed
•
5500 W for high-input (80-A) dual feed
52