Switch Control Boards; Switch Control Boards Specifications; Switch Control Board Srx5K-Scb Specifications - Juniper SRX5400 Reference
Firewall card reference
Hide thumbs
Also See for SRX5400:
- Hardware manual (438 pages) ,
- Manual (102 pages) ,
- Getting started manual (34 pages)
Table of Contents
Advertisement
CHAPTER 6
Switch Control Boards
IN THIS CHAPTER
Switch Control Boards Specifications | 75
Switch Control Boards Specifications
IN THIS SECTION
Switch Control Board SRX5K-SCB Specifications | 75
Switch Control Board SRX5K-SCBE Specifications | 78
Switch Control Board SRX5K-SCB3 Specifications | 81
Switch Control Board SRX5K-SCB4 Specifications | 84
Switch Control Board SRX5K-SCB Specifications
The SRX5K-SCB Switch Control Board (SCB)
• Powers on and powers off I/O cards (IOCs) and Services Processing Cards (SPCs)
• Controls clocking, system resets, and booting
• Monitors and controls system functions, including fan speed, board power status, PDM status and
control, and the system front panel
• Provides interconnections to all the IOCs within the chassis through the switch fabrics integrated
into the SCB
SRX5400 and SRX5600 Firewalls have one SCB each installed and you can install a second SCB for
redundancy. The SRX5800 Firewall has two SCBs installed and you can install a third SCB for switch
fabric redundancy.
(Figure 38 on page
76) performs the following functions:
75
Advertisement
Table of Contents
