Table of Contents
Advertisement
NOTE: The fabric connectors on the MX10K-LC9600 line card are sensitive to debris
accumulation. The connectors interface with the connectors on the JNP10004-SF2 SFB and the
JNP10008-SF2 SFB. The connectors must be kept clean and free of dust and other particles to
ensure a high-quality connection between the MX10K-LC9600 line card and the JNP10004-SF2
SFB and the JNP10008-SF2 SFB.
The MX10K-LC9600 line card runs the Juniper Networks Junos OS software on Juniper Networks
JNP10K-LC9600 hardware. The MX10K-LC9600 plugs in to the MX10004 and MX10008 routers
horizontally at the front of the chassis.
The fabric interface connectors on the MX10K-LC9600 line card have a preinstalled protective plastic
dust cover. This cover keeps the connectors clean and free of dust and other particles. Remove the dust
cover before you install the line card in the router. Save the plastic cover for future use to re-install
when you remove the line card from the router.
The WAN ports on the MX10K-LC9600 line card also have preinstalled protective plastic dust covers.
These covers keep the ports clean and free of dust and other particles. Keep these covers installed in
any port that is not occupied by an optic module.
Software release
•
•
Description
•
•
•
•
Junos OS Release 21.4R1 and later when installed in MX10008.
Junos OS Release 22.3R1 and later when installed in MX10004.
Model number: JNP10K-LC9600
JNP10K-LC9600
Name in the CLI:
Weight: 27 lb (12.24 kg)
Dimensions: Height = 1.89 in. (48.01 mm), width = 17.2 in (436.88 mm), depth =
19.05 in. (484 mm) (excluding FRU ejector)
75
Advertisement
Table of Contents
