Table of Contents
Advertisement
5. Grasp the handles, and slide the RCB about halfway out of the chassis (see
Figure 87: Removing a Routing and Control Board
6. Grasp each side of the RCB and slide it completely out of the chassis.
7. Place the RCB on the antistatic mat.
8. If you are not replacing the RCB now, install a cover panel in the empty slot.
MX10004 Line Card Maintenance
SUMMARY
Maintaining Juniper Networks MX10004 routers
includes removing and reinstalling line cards.
Figure 87 on page
IN THIS SECTION
Handle and Store MX10004 Line Cards
Properly | 192
Handle an MX10004 Line Card
Properly | 192
Store a Line Card Properly | 193
Bring an MX10004 Line Card Online or Take
It Offline | 194
191
191).
Advertisement
Table of Contents
