Table of Contents
Advertisement
Cables and
TIP: You can use the
connectors
pluggable transceivers that your Juniper Networks device supports.
See the list of supported transceivers for the MX Series at
Transceivers.
MX10K-LC480 supports 1-Gbps Copper SFP modules in all the ports. You must use
shielded RJ45 cables with 1-Gbps copper SFP modules.
You must install the MX10K-LC480 line card in the MX10008 and MX10016 routers
along with the front panel with filter to meet the EMI Class-A emission standards.
The following applies to a router (MX10008 or MX10016) installed with the front panel:
•
•
•
NOTE: The 1-Gbps copper SFP modules on the MX10K-LC480 line card do not support
Precision Time Protocol (PTP) or Synchronous Ethernet functionality.
Hardware Compatibility Tool
We recommend that you use only 16 ports per line card with copper SFP modules -
the last 8 ports on the MIC0 (0/16 through 0/23) and the first 8 ports on the MIC1
(1/0 through 1/7).
The MX10008 router supports a maximum of 128 copper SFP modules of 1 Gbps
capacity.
The MX10016 router supports a maximum of 192 copper SFP modules of 1 Gbps
capacity.
to find information about the
MX Series Supported
73
Advertisement
Table of Contents
