Table of Contents
Advertisement
9. Re-insert the protective plastic covers on the fabric interface connectors of the SFB to keep the
connectors clean and free of dust and other particles (see
Figure 83: Insert the Protective Plastic Covers on the JNP10004-SF2 SFB Interface Connectors
MX10004 Routing and Control Board Maintenance
SUMMARY
Maintaining a Juniper Networks MX10004 router
includes removing and installing the Routing and
Control Board (RCB).
Figure 83 on page
185).
IN THIS SECTION
Handle and Store Routing and Control Boards
Properly | 186
Install an MX10004 Routing and Control
Board | 187
Remove an MX10004 Routing and Control
Board | 189
185
Advertisement
Table of Contents
