Juniper MX10004 Hardware Manual page 187

earthing terminal and below the bottom power supply on the rear of the MX10004 (see
on page 177).
Figure 75: ESD Point on the Rear of the MX10004
ESD point
1
—
3. Remove the appropriate fan tray (see
CAUTION: Do not remove both fan trays at the same time. Remove and replace
one fan tray at a time. If you remove both fan trays, the system triggers a thermal
alarm and shuts down the router.
"Remove an MX10004 Fan Tray" on page
Figure 75
166).
177