Table of Contents
Advertisement
fasteners, two on each side of the chassis. See
the MX10004 chassis.
Figure 113: Stacking Configuration for Packing the MX10004 Chassis
To pack an MX10004 chassis for shipping:
1.
Power down the chassis and remove the power cables. See
211.
2.
Remove the cables that connect the MX10004 chassis to all external devices.
3.
Remove all line cards and pack them in their original shipping containers. See
from an MX10004 Router Chassis" on page 198
4.
Install covers over blank slots.
Leave components that came installed in the chassis, inside the chassis. These components may
include RCBs or power supplies.
Figure 113 on page 233
"Remove an MX10004 Router" on page
and
"Store a Line Card Properly" on page
for the stacking configuration of
"Remove a Line Card
193.
233
Advertisement
Table of Contents
