Table of Contents
Advertisement
1. Wrap and fasten one end of the Electrostatic Discharge (ESD) grounding strap around your bare
wrist, and connect the other end of the strap to the ESD point on the front of the chassis. See
45 on page
129.
Figure 45: ESD Point for MX10004 Chassis Front
ESD point
1
—
2. Insert all optics.
3. Lift the front door and align the captive screws in the door with holes in the chassis flange. Fasten
the door to the chassis and rack using the captive screws, and hand tighten. See
129.
Figure 46: Attach Front Door Using the Captive Screws
Figure
Figure 46 on page
129
Advertisement
Table of Contents
