Powering Off Using The Appliance Power Switch - Juniper JA2500 Junos Space Hardware Manual

Powering Off Using the Appliance Power Switch

Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
To power off the appliance using the management console, do the following:
At the console login prompt, log in to the appliance as the admin user.
1.
The Junos Space Settings Menu appears.
Type , which is the
6 (Debug) run shell
2.
You are prompted to enter your password.
Type the password for the admin user and press Enter.
3.
You are taken to the shell.
To power down the appliance, execute the following command:
4.
[root@host ~]# poweroff
The appliance displays output messages on the management console and then
powers off. When the appliance is powered off, the green Power LED on the front
panel of the appliance goes out; in addition, the Power Supply Module LED turns
amber.
To power off the Junos Space Appliance using the appliance power switch, do the
following:
Locate the appliance power switch on the back panel of the appliance chassis.
1.
Press the power switch and release it.
2.
The appliance displays output messages on the management console and then
powers off.
NOTE: If a Junos Space Appliance hangs or is not responding, then you
can hard power off the appliance by pressing down the appliance power
switch and holding it down for 10 seconds. After the appliance powers off,
release the power switch.
When the appliance is powered off, the green Power LED on the front panel of the
appliance goes out; in addition, the Power Supply Module LED turns amber.
General Electrical Safety Guidelines and Warnings on page 175
General Safety Guidelines and Warnings on page 151
Installing and Removing JA2500 Junos Space Appliance Hardware Components on
page 123
Chapter 7: Performing Initial Configuration
option.
103