Table of Contents
Advertisement
These RCBs run Junos OS 22.3R1. See
Figure 5: The JNP10K-RE1 and JNP10K-RE1-128 Routing and Control Boards
The MX10004-BASE configuration has a single RCB. The fully redundant configurations have two RCBs.
The RCB also contains Precision Time Protocol (PTP) ports and four Media Access Control Security
(MACsec) capable ports. See
Line Cards
The MX10004 has four horizontal line card slots. The line cards combine a Packet Forwarding Engine
and Ethernet interfaces enclosed in a single assembly. The MX10004 line card architecture is based on a
number of identical, independent Packet Forwarding Engine slices. Line cards are FRUs that you can
install in the line card slots labeled 0 through 3 (top to bottom) on the front of the chassis. All line cards
are hot-removable and hot-insertable.
The MX10004 supports the following line cards:
•
"MX10K-LC2101" on page 67
•
"MX10K-LC480" on page 70
•
"MX10K-LC9600" on page 74
Figure 5 on page
"MX10004 Components and Configurations" on page
7.
11.
7
Advertisement
Table of Contents
