Table of Contents
Advertisement
5.
Remove the cardboard accessory box.
6.
Remove the foam padding from the top of the box.
7.
Remove the plastic cover from the router chassis.
8.
Use a mechanical lift to lift the chassis from the shipping pallet. Otherwise, unload all of the
components, except the fan tray controller, and manually lift the chassis from the shipping pallet.
See
Figure 35 on page 110
JNP10004-RMK-4POST Rack-Mount Kit" on page
Figure 35: Lift the Chassis Off the Pallet
NOTE: The chassis has two handles that are designed for subtle positioning of the chassis.
Do not lift the chassis by the handles.
9.
Unpack the accessory box and lay out the contents so that they are ready for use.
10. Verify that your order includes all appropriate parts. See
the Packing List" on page 112
information about base configurations and redundant configurations.
11. Save the shipping box and packing materials to move or ship the router at a later time.
and
"Mount the Juniper Networks MX10004 Router Using the
120.
and
"MX10004 Components and Configurations" on page 11
"Compare the MX10004 Router Order to
110
for
Advertisement
Table of Contents
