Table of Contents
Advertisement
Unpack the MX10004 Router
SUMMARY
Unpack the router using the recommended tools and
following the recommended procedure.
Unpack the MX10004 Shipping Pallet
Gather the following tools and parts to unpack the Juniper Networks MX10004 router:
• Phillips (+) screwdriver, number 2
• 1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping pallet
• A box cutter or packing knife to slice open the nylon straps and tape that seal the crate and boxes
• Blank panels to cover any slots not occupied by a component
After you prepare the installation site as described in
The MX10004 router chassis is a rigid sheet-metal structure that houses the hardware components. The
chassis ships in a cardboard box that has a two-layer wooden pallet base with foam cushioning between
the layers. The router chassis is bolted to the pallet base. The carton also contains an accessory box and
a rack-mount kit.
NOTE: The chassis is well protected inside the shipping box. Keep it secure in its packaging until
you are ready to begin installation.
IN THIS SECTION
Unpack the MX10004 Shipping Pallet | 108
Unpack Line Cards, Routing Control Boards,
and Switch Fabric Boards for the MX10004
Router | 111
Compare the MX10004 Router Order to the
Packing List | 112
Register Products—Mandatory to Validate
SLAs | 119
Table 28 on page
80, you can unpack the router.
108
Advertisement
Table of Contents
