Juniper MX10004 Hardware Manual page 227

NOTE: The two handles on the side of the chassis are meant only to help guide the empty
chassis out of the base and rear brackets; they are not for lifting.
4. On each side, hold the bottom of the chassis and carefully lift it up from the mounting tray attached
to the rack.
5. Carefully lift the chassis out of rack. If you have a pallet jack, move the router onto the pallet jack.
See Figure 104 on page
Figure 104: Lift the MX10004 Without Using a Mechanical Lift
6. Carefully move the chassis to its new location.
After moving the router to its new location, install the components in the chassis or store the
components in antistatic bags.
217.
217