Install A Front Door With Filter - Juniper MX10004 Hardware Manual

Install a Front Door with Filter

Be sure you have the following tools and parts before you begin:
• A Phillips(+) screwdriver, number 2 (not provided)
• Front door (provided)
• Three cable seals—Two seals for the right side and one for the left side (provided)
• Cable management system (provided)
See Figure 47 on page 130
Figure 47: JNP10004-FRPNL1 Components
Front door with filter frame
1
—
2 Routing Control Board (RCB) cable seal
—
for the shipped components.
Right cable seal
3
—
4 Left cable seal
—
130