Manually Remove An Mx10004 Router From A Four-Post Rack - Juniper MX10004 Hardware Manual

After moving the router to its new location, install the components in the chassis or store the
components in antistatic bags.
Figure 103: Move the MX10004 Using a Mechanical Lift

Manually Remove an MX10004 Router from a Four-Post Rack

Before you manually remove a Juniper Networks MX10004 router from a rack:
• Ensure that the rack is stable and secured to the building.
• Ensure that there is enough space to place the removed router in its new location and that the path
to the new location is clear.
Maintenance" on page
• Review "General Safety Guidelines and Warnings" on page
• Review the chassis lifting guidelines described in
page 247.
• Ensure that the router is safely powered off (see
"MX10004 Clearance Requirements for Airflow and Hardware
87.
239.
"Chassis and Component Lifting Guidelines" on
"Power Off an MX10004 Router" on page
215
212).