Mx10016 Switch Fabric Board - Juniper MX10016 Hardware Manual

Table 23: JCS Port LEDs on the Routing and Control Board
LED Color
LINK LEDs for Unlit
JCS Ports
(XGE0 and
Green
XGE1)
Green
Yellow
Table 24 on page 80 describes the LEDs for the secondary SATA drives.
Table 24: Routing and Control Board SSD Status LEDs
LED
DISK1 and DISK2
RELATED DOCUMENTATION
Removing and Installing Routing and Control Boards

MX10016 Switch Fabric Board

IN THIS SECTION
MX10016 Switch Fabric Board Description | 81
Switch Fabric Board LEDs | 83
State
Off
On steadily
Blinking or flickering
Blinking
Color State
Green On steadily
Green Blinking
Yellow On steadily
Dark Unlit
Description
No transceiver is present.
A link is established. The interface is up.
The beacon feature is enabled.
An error has occurred.
Description
A SATA drive is present.
The drive is active.
The drive is active.
A drive is not installed.
80