Table of Contents
Advertisement
Table 52: Switch Fabric Board Removal Alarm Times
Line Card Type
MX10K-LC2101
MX10K-LC480
Ensure that you have the following equipment before you install an SFB:
• Antistatic bag or antistatic mat
• Electrostatic discharge (ESD) grounding strap
• Phillips (+) number 2 screwdriver (optional)
• Replacement SFB
To install an MX10004 Switch Fabric Board:
1.
Place an antistatic bag or an antistatic mat on a flat, stable surface.
2.
Wrap and fasten one end of the ESD grounding strap around your bare wrist and connect the other
end of the strap to an ESD point on the chassis. An ESD point is located next to the protective
Ambient Temperature (°C)
33
40
40
(Continued)
Traffic (%)
100%
100%
100%
Duration
3 min 28 sec
2 min 4 sec
6 min
176
Advertisement
Table of Contents
