Table of Contents
Advertisement
• A cover panel for the empty slot if you are not replacing the RCB
CAUTION: In base configurations, removal of the RCB causes the system to shut down.
In redundant configurations, removal of the functioning RCB causes the system to
reboot and start the election process for a new primary.
To remove an MX10004 RCB:
1. Place an antistatic bag or antistatic mat on a flat, stable surface.
2. Use the following CLI commands to take the RCB offline:
user@host>request vmhost power-off other-routing engine
Power-off the vmhost ? (yes,no?
yes
Initiating vmhost shutdown...
warning: Initiating Junos shutdown...
shutdown: [pid 42862]
Shutdown NOW!
user@host>request chassis cb slot
You can use the show chassis environment cb | match State CLI command to verify that the RCB is offline.
user@host>show chassis environment cb | match State
State
State
3. Wrap and fasten one end of an ESD strap around your bare wrist, and connect the other end of the
strap to the ESD point on the chassis (see
4. Simultaneously rotate the RCB handles counterclockwise to unseat the RCB.
slot-number offline
Online Master
Offline
Figure 84 on page
188).
190
Advertisement
Table of Contents
