The System Unit Control Panel - Siemens RM400 C Series Operating Manual

4
Installing the system unit
4.4

The system unit control panel

Figure 6: System unit control panel
(1) [ON/OFF]
[ON/OFF] switches the system unit on and off. [ON/OFF] can only be
operated if the keylock switch is in the LOCAL position.
You must switch on the monitor before switching on the system unit.
Never press [ON/OFF] if the operating system is active and the
!
keylock switch is set to LOCAL. This may cause data to be lost.
(2) POWER
This LED lights up green when the system unit is on (also applies to BBU
operation).
30
1 2 3
LOCK
R L
E
O
M
C
O
A
T
L
E
ON/OFF POWER
RM400 C Models
5
4
DISK RESET
U24802-J-Z146-2-7600