Setting Control Unit Network - Siemens Perfect Harmony GH150 Function Manual

5.5.4

Setting control unit network

Network setting requires Administrator right. Log in as Administrator before an attempt to
change IP. The IP address of the Control Unit can be changed successfully only if DHCP is
deactivated.
Figure 5-34
Network setting for single circuit
Figure 5-35
Operator panel for SINAMICS Perfect Harmony GH150 air-cooled MV Converters
Function Manual, 12/2022, A5E51241343A
Settings network when single circuit under "Observer" account
Settings network when single circuit under "Administrator" account
Operator panel configuration
5.5 Setting HMI App
39