Configuring The Console, Keyboard, Mouse And Monitor - Siemens RM400 C Series Operating Manual

7.1.2

Configuring the console, keyboard, mouse and monitor

When you switch on the system, it boots automatically. During the boot procedure,
control messages are issued until you are prompted for information about your
terminal.
Alphanumeric console
If you have an alphanumeric console, the following selection menu appears:
You can choose one of the following term variables for your console terminal
1. vt02
2. 97801
3. ba80/9766
Please type in the number of your terminal: _
Select the appropriate console terminal type.
Ê
Various other messages are then displayed, and eventually the following message
appears:
The system is ready.
Name_xyz
Console Login:
Now skip to the section "Terminating the initial boot procedure" on page 100.
Ê
U24802-J-Z146-2-7600 RM400 C Models
7
Software
81