Siemens RM400 C Series Operating Manual page 106

7
Software
submenu Startup
Information on the parameters:
Start via xdm
Proceed as follows:
Ê Fill in the form.
Save the values by pressing the
Ê
You then return to the X Server Administration window.
Choose the menu item Extended.
Ê
96
If you choose yes here, xdm restarts the X server each time the
system is powered on and whenever a session is terminated.
Your work is then completely graphic.
If you enter no instead, the X Server will not start
!
until you invoke the startx & or startrx & command
from the shell. This means that you must first log on
to the Alpha screen
[SAVE]
RM400 C Models
function key.
U24802-J-Z146-2-7600