The following pages describe problems that may arise and suggest ways of solving
them:
–
The first part deals with problems that may occur when you switch on and boot
the system.
–
The second part relates to problems that may occur when you are using the
drives.
Error messages for the operating system and the application software are discussed
in the relevant manuals and in the diagnostics manual.
If the recommended actions are unsuccessful, try rebooting (switch the system unit
off and after about 10 seconds switch it back on again).
If rebooting does not help, inform SNI Service. Record all the activities which may
have caused the problem and any actions you have taken so far in attempting to
eliminate it.
U24802-J-Z146-2-7600
RM400 C Models
8
Troubleshooting
103