Fcc Notices (Federal Communications Commission) - Siemens RM400 C Series Operating Manual

Table of Contents

Advertisement

2
Important notes
Important:
The wires in this power supply cable are colored in accordance with the following
code:
Green and Yellow:
Blue:
Brown:
As the colors of the wires in the power cable for this device may not correspond with
these colored markings identifying the terminals in your plug, proceed as follows:
The wire which is colored green and yellow must be connected to the terminal
in the plug which is marked with the letter E or by the earth symbol or colored
green or green and yellow.
The wire which is colored blue must be connected to the terminal which is
marked with the letter N or colored black.
The wire which is colored brown must be connected to the terminal which is
marked with the letter L or colored red.
2.6
FCC notices (Federal Communications
Commission)
Class A digital device
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful inter-
ference in which case the user will be required to correct the interference at his own
expense.
14
Earth
Neutral
Live
RM400 C Models
U24802-J-Z146-2-7600

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm400 c60Rm400 c62Rm400 c70Rm400 c72Rm400 c80Rm400 c90

Table of Contents