Connecting and commissioning
8.3 Preparing the control unit
8.3
Preparing the control unit
Preparing the control unit for connection and installation
1. Nudge the door into the CLOSED position.
2. Open the housing cover.
Disconnect the power supply at slot X3
8.4
Connecting a geared motor to the control unit
Connecting a geared motor to the control unit
Connect the motor plug to slot X7.
Note
The X6 control inputs plug is not plugged in during commissioning in order to prevent
uncontrolled movements.
94
SIDOOR ATD400T door control units for railway applications
System Manual, 06/2020, A5E42201947-AB