Drive Names - Siemens RM400 C Series Operating Manual

14
Equipment settings
14.2

Drive names

This section lists the drive-specific device names (special files) with which the drives
can be addressed. If you wish to execute a write or read command for a data
medium, you must specify the device name of the drive containing the data medium.
Access to the drives can be defined by means of options. These options and their
meanings are explained, as is the way to determine the device names.
Device name
(autoconf output)
fd01
HP 88780
MC23
MC41
MC43
MC10
MC75
MC12
OS26 (CD-ROM)
OS28 (CD-ROM)
Options (in square brackets) for special file names
c Data compression
h High density
n No rewind
o No rewind, leave in block
170
Type
Floppy disk drive
1
inch MT, 160 Mbyte
/
2
4 mm MTC
(DAT, 4 Gbytes)
4 mm MTC jukebox
(DAT, 6 x 4 Gbytes)
4 mm MTC
(DAT, 2.0 Gbytes)
8 mm MTC
(5 Gbytes and data com-
pression)
8 mm MTC
(20 Gbytes and data
compression)
1/4 inch MTC 525
Mbytes
CD-ROM (650 Mbyte)
CD-ROM (650 Mbytes)
RM400 C Models
Special file name
/dev/at/flp/rf[0t|x3ht|x3dt]
/dev/ios0/rstapeXXY[h][n][o]
/dev/ios0/rstapeXXY[h][n][o][c]
/dev/ios0/rstapeXXY[h][n][o][c]
/dev/ios0/rstapeXXY[h][n][o]
/dev/ios0/rstapeXXY[c][h][n][o]
/dev/ios0/rstapeXXY[c][h][n][o]
/dev/ios0/rstapeXXY[h][n][o][v]
/dev/ios0/sdiskXXYs0
/dev/ios0/sdiskXXYs0
U24802-J-Z146-2-7600