Siemens RM400 C Series Operating Manual page 51

(1) MOUSE
(2) KEYB.
(3) - EISA 6 - 1
(8)
(9) - PCI 5 - 1
(13)
(14) PRINTER
(15) VGA
(16) - SCSI 1 - 4
(19)
(20)
(21) SCSI
(22) 10BT
(23)
(24) Ethern. AUI
(25) CONSOLE/
COM1
(26) PORT1/
COM2
(27)
The two LAN ports (for twisted-pair (10BaseT) (22) and for Ethernet AUI
i
(24) cannot both be used at the same time.
* The RM400-C80 and -C90 models incorporate a double power connection (see
figure 8).
U24802-J-Z146-2-7600
Mouse port
Keyboard port
Slots for EISA controllers
Slots for PCI controllers
System printer port (Bitronics interface)
Port for color monitors (SVGA)
Optional ports for SCSI devices (only in conjunction with
a controller in a slot)
LEDs for CPU activity
SCSI (external), port for single-ended SCSI devices that
can be attached to the internal SCSI bus. No terminator
is required because the system will where necessary
activate the internal terminating resistance automati-
cally.
LAN port - twisted-pair (10BaseT), 8-pin connector for
Ethernet link
LEDs indicating correct connection of the SCSI 0 port
(LED upper right) and activity on the Ethernet link
(send/receive, lower LEDs)
LAN port - AUI (Attachment Unit Interface) port for
connecting cable to fan-out unit or transceiver
First serial port (V.24, modem-capable)
Second serial port (V.24, modem-capable)
Power connector *
RM400 C Models
Installing peripherals
5
41