System Components - Siemens RM400 C Series Operating Manual

Table of Contents

Advertisement

13.1

System components

The system unit houses the motherboard, the processor board, the controllers and
the power supply. A
3
the system unit by default. Quarter-inch, 4 mm and 8 mm cartridge tape drives and
CD-ROM drives can be installed as options.
The following equipment can be attached to the system unit:
display screens (graphical monitors)
33 cm (14"), 35 cm (15"), 40 cm (17") oder 50 cm (21")
The optional PCI graphics controller is recommended for 50 cm (21") color
monitors.
other terminals
or alphanumeric console terminal
printers
connected to the Bitronics, V.24 and LAN ports
or to the V.11 port
peripherals cabinets
containing additional hard disks and RAID (Redundant Array of Independent
Disks) subsystems
optical storage media
OD (optical disk) drives and OD jukeboxes
modems
other peripherals
such as drives in peripherals boxes, tape (cartridge) jukeboxes
or terminal servers and data multiplexers
uninterruptible power supply
U24802-J-Z146-2-7600
1
" hard disk drive and a
/
2
RM400 C Models
Technical data
1
3
" floppy disk drive are installed in
/
2
13
147

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm400 c60Rm400 c62Rm400 c70Rm400 c72Rm400 c80Rm400 c90

Table of Contents