Connecting a printer to the Bitronics interface
Attach the power cord and the connecting cable to the printer as described in
Ê
the printer operating manual. You can order a connecting cable separately if
you need one (maximum allowable line length three meters).
Attach the other end of the connecting cable to the matching port on the
Ê
system unit (1).
Ê
Secure the connector.
Attaching a printer (or modem) to a V.24 port
1
2
Figure 10: Attaching a printer (or modem) to a V.24 port
Attach the power cord and the connecting cable to the printer (or modem) as
Ê
described in the accompanying operating manual.
Attach the other end of the connecting cable to the matching port on the
Ê
system unit ((1) or (2)).
Ê
Secure the connector.
U24802-J-Z146-2-7600
RM400 C Models
Installing peripherals
5
43