Siemens RM400 C Series Operating Manual page 60

5
Installing peripherals
Token Ring LAN controller (EISA)
Figure 20: Token Ring LAN controller (EISA) (CL31) - (optional) -
This LAN controller will accept two types of LAN cable, either unshielded twisted-pair
(UTP) or shielded twisted-pair (STP). You cannot use both ports on this LAN
controller at the same time.
left-hand port
right-hand port
Ê To attach LAN cables of type UTP (unshielded twisted-pair) you use the left-
hand port. The connector must lock into place.
Ê To attach LAN cables of type STP (shielded twisted-pair) you use the right-
hand port. Secure the connector by tightening the locking screws.
Token Ring LAN controller (PCI)
Figure 21: Token Ring LAN controller (PCI) (CL32) - (optional) -
This LAN controller will accept two types of LAN cable, either unshielded twisted-pair
(UTP) or shielded twisted-pair (STP). You cannot use both ports on this LAN
controller at the same time.
left-hand port
right-hand port
The LAN cables are attached as described above.
50
unshielded twisted-pair (UTP)
shielded twisted-pair (STP)
unshielded twisted-pair (UTP)
shielded twisted-pair (STP)
RM400 C Models U24802-J-Z146-2-7600