Siemens RM400 C Series Operating Manual page 93

Notes on SYSADM
– At initial startup the dialog appears in English.
– The cursor appears in the first input field. Use the Ê, Ë and Ú keys to move
the cursor to the next input field.
Use the [HELP] or [F1] key to request a help text. The help text always relates
–
to the input field where the cursor is currently located.
– Use the [CHOICES] or [F2] key to complete each input field.
You can make your entries via the keyboard, but it is preferable to use the
function keys mentioned. The function keys output all permitted values for
selection, either directly in the input field or in an additional list. Use the Ê and
Ë keys to position the cursor on the required entry, and transfer your selection
to the input field by pressing Ú.
– Finally, press [SAVE] or [F3].
If you do not want to change the default parameters, you can press [EXIT] or
[F8] instead.
U24802-J-Z146-2-7600 RM400 C Models
7
Software
83