The Floppy Disk Drive - Siemens RM400 C Series Operating Manual

10
Drives
10.2

The floppy disk drive

Figure 46: Floppy disk drive
(1) Access LED
(2) Release button
You must not press the release button (2) on the floppy disk drive while
!
the access LED (1) is lit.
Inserting a floppy disk
Hold the disk with the metal shutter facing the drive and the round plate in the
Ê
middle of the disk facing downwards.
Push the disk right into the drive until it clicks into place and the release button
Ê
pops out.
Removing a floppy disk
You must not remove a floppy disk while the floppy disk drive access LED
!
is lit.
Press the release button.
Ê
The floppy disk will now slide part of the way out of the drive slot, and you can pull it
all the way out of the drive.
116
1
RM400 C Models
2
U24802-J-Z146-2-7600