Siemens RM400 C Series Operating Manual page 99

Proceed as follows:
Fill in the form.
Ê
Ê Save the values by pressing the
If you entered no for Additional Options, please move on to the section "Concluding
the keyboard configuration" on page 90.
Specifying additional options
If you entered yes for Additional Options, another form is displayed:
Information on the parameters:
Display mode
Possible values: all, alpha, graphic
The keyboard should only be set for one specific display mode. Use the
[CHOICES]
U24802-J-Z146-2-7600
[SAVE]
function key if you want to change the default setting all.
RM400 C Models
function key.
7
Software
89